Model 901 Headspace Oxygen Analyzer
Model 901 Headspace Oxygen Analyzer
The Quantek Model 901 is a battery-operated, portable headspace oxygen analyzer.
The Model 901 is used primarily for the measurement of residual oxygen in gas-flushed food packages. With an expected oxygen sensor life of 4-5 years, it vastly outperforms other headspace oxygen analyzers with a cheap sensor that might last 1-2 years.
Use it in the lab, or on the packaging line. Non-technical personnel will find it very easy to use – and at less than 3 pounds, it can be easily transported to other locations.
HOW TO SAMPLE YOUR PACKAGES
The sample probe is tipped with a particulate filter and syringe needle. Simply affix the foam septa to your package, insert the needle through the septa, and press the pump button. Sample is drawn through the probe and into the internal oxygen sensor.
The pump will draw about 5 cc/second from your package. The pump will run from 2 to 12 seconds and this time is easily adjustable using the side controls. The oxygen concentration displays within 15-20 seconds.
LOWEST TOTAL COST OF OWNERSHIP
The Model 901 oxygen analyzer is the market leader for durability, simplicity, and reliability. The initial lower cost, and longer-life sensor, makes it the industry leader in handheld portable headspace oxygen analyzers.
ABOUT THE INTERNAL OXYGEN SENSOR
The sensor is unaffected by high levels of background gases such as nitrogen or carbon dioxide, and unaffected by trace hydrocarbons. You can use the Model 901 for applications where oxygen level is very high (50 to 100%) without overloading the sensor. The expected electrochemical sensor life is typically 5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years.
- Range: 0.0 to 100% Oxygen
- Resolution: 0.1% Oxygen
- Accuracy: +/- 1% of reading
- Minimum Detection Limit: 0.1%
- Drift: less than 1% per month
- Sensor: Proprietary electrochemical cell, expected lifetime 4-5 years
- Sample Pump: Internal, draws ~5cc/sec, with 2-12 second adjustable timer (on side of unit)
- Sampling Assembly: Probe with male luer connection for side-port needle, PTFE tubing
- Calibration: Calibrates with room air; SPAN adjustment on side; ZERO adjustment on side
- Calibration Frequency: Minimum once per year
- Power Supply: Four "AA" NiMH rechargeable batteries; auto shut-off after 45 minutes idle. 100-240V (50-60Hz) Charger included, with US or international interchangeable plug adapter (upon request)
- Backup Power: Four "AA" alkaline batteries (not included)
- Input Voltage: 100-240V, 50-60Hz
- Battery Life: 10-14 hours before recharging
- Size: 8 x 4 x 1.8 in. (200 x 100 x 40 mm)
- Weight: 1 lb. (450 gms)
- Warranty: 2 years, parts and labor
- Standards: CE, RoHS
- Included Consumables: 200 foam septas, 2 luer fit needles, 2 particulate filters, 2 liquid block filters
- Included Documentation: Owners manual (includes operating instructions with detailed calibration instructions, calibration certficate, precautions), NIST calibration certificate
- Origin of Goods: Our products are manufactured in the U.S.A.
- Meats
- Dairy Products
- Produce
- Snack Foods
- Baked Foods
- Prepared Meals
- Coffee
- Pet Foods
- Dessert Foods
- .... and many More
- Built-in pump, sample probe.
- Starter pack of 200 foam septas
- 2 needles.
- 2 particulate filters,
- 2 moisture blocking filters,
- High quality industrial AA rechargeable batteries
- Charger - (International compatible 100-240V)
- Super fast sensor (for results in 5 seconds instead of 15)