Model 200 Portable O2 Analyzer

 

For Rapid Spot Checks of Oxygen Concentrations

 

 


MEASURE O2 IN MANY APPLICATIONS
 

The Model 200 Portable Spot Check O2 Analyzer is a battery-operated, portable oxygen analyzer used for the measurement of residual oxygen in gas blending, enclosed systems, bio reactors or any application where the sample of interest can be introduced to the inlet fitting of the analyzer, where it flows to the sensor.

Where no flow is available, the squeeze bulb can be used to to draw sample into the sensor.

Alternatively, the unit can be equipped with the sensor inlet open to the atmosphere and the entire unit placed in a closed system to be monitored for oxygen level. The sensor operation is not sample flow dependent, and accurate results are obtained on both static and flowing samples. 

 

  FEATURES

  • Analyzes oxygen in all types of
    applications

  • Range 0.1 to 100% oxygen

  • Portable, battery operated

  • Long-life sensor

  • Inexpensive to maintain and operate

  • Economically priced

  • Calibrates with room air
     

  APPLICATIONS

  • Bioreactors

  • Gas Blending Systems

  • Fruit Storage Areas

  • Fermentation

  • Welding Gases

  • Controlled Atmosphere Rooms

    
 

      HEAVY DUTY, LONG-LIFE SENSOR
 

      The sensor is a proprietary electrochemical type with a measurement range of 0.1 to 100%. Excellent linearity through the entire range allows a calibration with one set point using room air. It is unaffected by high levels of background gases such as nitrogen or carbon dioxide. The Model 200 can be used for applications where the oxygen level is very high (50 to 100%), without overloading the sensor. It is unaffected by trace hydrocarbons or high levels of CO2, which can poison other types of sensors, and operates independent of flow rate.


BATTERY OPERATION

      
The Model 200 is powered by two AA alkaline batteries.
 

MADE IN THE USA 

 

All of our products are manufactured in the USA.