Model 901 O2 Analyzer
  For Analysis of Oxygen In Gas Flushed (MAP) Food Packages
   

FEATURES

  • Analyzes oxygen in all types of packages

  • Range 0.1 to 100% oxygen

  • Built-in sample pump, probe

  • Portable, battery operated

  • Long-life sensor

  • Economically priced

  • Inexpensive to operate & maintain

  • Calibrates with room air

APPLICATIONS

  • Meats

  • Dairy Products

  • Produce

  • Snack Foods

  • Baked Foods

  • Prepared Meals

  • Coffee


 

VERSATILE, RUGGED DESIGN

 

The Quantek Model 901 is a battery-operated, portable oxygen analyzer used for the measurement of residual oxygen in gas-flushed (CAP/MAP) food packages. This hand-held unit can be used by non-technical personnel where you need it, in the lab or at the packaging line, or it can be easily trasported to other locations. The Model 901 is powered by Ni-Cad  rechargeable batteries, with typically 8 hours of operation before recharging is required.

 

FOOD APPLICATIONS

 

The Model 901 design has proven itself in hundreds of installations for food applications such as meats, fresh produce, pasta, nuts, snackfoods, dairy products and coffee. The sensor is unaffected by high levels  of background gases such as nitrogen or carbon dioxide. The Model 901 can also be used for applications where the oxygen level is very high (50 to 100%), without overloading the sensor. It is unaffected by trace hydrocarbons or high levels of CO2, which can poison other types of sensors.

 

EASY SAMPLING & ANALYSIS

 

The Model 901 sample probe is tipped with a particulate filter and luer fit syringe needle with side-port holes to prevent plugging. Sample is drawn through the probe and tubing and then to the oxygen sensor when the pump is turned on. The pump is electronically timed to draw in the precise amount of sample required for the analysis, and then turns itself off after the pre-set sampling time (5 to 10 seconds). The oxygen concentration is read on the display.

 

LOW COST

 

The Model 901 is a cost effective, reliable alternative to other analyzers. Not only is the initial cost much lower, but operating supplies and maintenance costs are lower as well.

 

STOCKED PARTS

 

All supplies and spares are stocked in inventory for immediate shipment when ordered

 

PRIORITY SERVICE AND SUPPORT
 

We strive to provide a high level of support and service to our customers. Technical support is readily available from our product support group via telephone, fax or E-Mail. Parts and repair orders are usually processed on a “same day” basis to minimize analyzer down time.

 

MADE IN THE USA  

 

All of our products are manufactured in the USA