Model 901 O₂ Analyzer

For Analysis of Oxygen In Gas Flushed (MAP) Food Packages

Demonstration Video

PRIORITY SERVICE AND SUPPORT
 
We provide the highest level of support and service to our customers. Technical support is readily available from our product support group via telephone, fax or E-Mail.

Parts and repair orders are usually processed on a “same day” basis to minimize analyzer down time.

Call (508) 839-3940, email us at sales@quantekinstruments.com, or fill our our brief application form with quote requests or questions.

The Quantek Model 901 is a battery-operated, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed (CAP/MAP) food packages. 

The Model 901 oxygen analyzer design has proven itself in hundreds of installations for modified atmosphere food applications around the world.

This hand-held unit can be used by non-technical personnel where you need it, in the lab or at the packaging line, or it can be easily transported to other locations.
 

EASY SAMPLING & ANALYSIS

The Model 901 oxygen analyzer sample probe is tipped with a particulate filter and luer fit syringe needle with side-port holes to prevent plugging. When the pump is activated, sample is drawn through the probe and tubing and then to the oxygen sensor.

The pump is electronically timed to draw in the precise amount of sample required for the analysis, and then turns itself off after the pre-set sampling time (5 to 10 seconds). The oxygen concentration is read on the display within 15-20 seconds.

LOWEST TOTAL COST OF OWNERSHIP

The Model 901 oxygen analyzer is a cost effective, reliable alternative to other analyzers. Not only is the initial cost much lower, but operating supplies and maintenance costs are lower as well. 

ABOUT THE MODEL 901 O2 SENSOR

The sensor is unaffected by high levels of background gases such as nitrogen or carbon dioxide. The Model 901 can also be used for applications where the oxygen level is very high (50 to 100%), without overloading the sensor. It is unaffected by trace hydrocarbons or high levels of CO2, which can poison other types of sensors.

The expected electrochemical sensor life is typically 5 years, unlike other analyzers with an electrochemical sensor that last 1-2 years.

Call (508) 839-3940 or email us with quote requests or questions.

- Analyzes oxygen in all types of packages

- Range 0.1 to 100% oxygen

- Built-in sample pump, probe

- Portable, battery operated

- Long-life sensor

- Economically priced

- Inexpensive to operate & maintain

- Calibrates with room air

- Can be powered with AA alkaline batteries if needed.

- Comes with starter packs of foam septas, needles & filters, and international compatible 100-240V charger

> Meats

> Dairy Products

> Produce

> Snack Foods

> Baked Foods

> Prepared Meals

> Coffee

> Pet Foods

> Dessert Foods

> .... and many More

Call (508) 839-3940, email sales@quantekinstruments.com, or fill our our brief application form with quote requests or questions.

© 2012, Quantek Instrument, Inc., 183 Magill Drive, Grafton MA 01519            (508) 839-3940                sales@quantekinstruments.com