Model 200 O₂ Analyzer

For Analysis of Oxygen In Gas Flows or Periodic Spot Checks

PRIORITY SERVICE AND SUPPORT
 
We provide the highest level of support and service to our customers. Technical support is readily available from our product support group via telephone, fax or E-Mail.

Parts and repair orders are usually processed on a “same day” basis to minimize analyzer down time.

Call (508) 839-3940, email us at sales@quantekinstruments.com, or fill our our brief application form with quote requests or questions.

The Quantek Model 200 is a battery-operated, portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows.

With the addition of the optional squeeze bulb, the Model 200 is ideal for pinpoint oxygen measurements

APPLICATIONS

The Model 200 Portable Spot Check O2 Analyzer is a battery-operated, portable oxygen analyzer used for the measurement of residual oxygen in gas blending, enclosed systems, bio reactors or any application where the sample of interest can be introduced to the inlet fitting of the analyzer, where it flows to the sensor.

Where no flow is available, the squeeze bulb can be used to to draw sample into the sensor.

Alternatively, the unit can be equipped with the sensor inlet open to the atmosphere and the entire unit placed in a closed system to be monitored for oxygen level. The sensor operation is not sample flow dependent, and accurate results are obtained on both static and flowing samples. 

Call (508) 839-3940 or email us with quote requests or questions.

> Welding Applications

> Bioreactors
> Gas Blending Systems
> Fruit Storage Areas
> Fermentation
> Controlled Atmosphere Rooms

HEAVY DUTY, LONG-LIFE SENSOR

The sensor is a proprietary electrochemical type with a measurement range of 0.1 to 100%. Excellent linearity through the entire range allows a calibration with one set point using room air. It is unaffected by high levels of background gases such as nitrogen or carbon dioxide. The Model 200 can be used for applications where the oxygen level is very high (50 to 100%), without overloading the sensor. It is unaffected by trace hydrocarbons or high levels of CO2, which can poison other types of sensors, and operates independent of flow rate.

BATTERY OPERATION

The Model 200 is powered by two AA alkaline batteries.

© 2012, Quantek Instrument, Inc., 183 Magill Drive, Grafton MA 01519            (508) 839-3940                sales@quantekinstruments.com